Hello fokes

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Big al79

New Member
Posts
4
Location
Peterhead
I have a discovery 2 td5 it had altanator problems so took it off to get tested and i also changed the inlet man gasket and the fuel reg was leaking replaced the gaskets and seals andi also replaced the injector loom as oil was in the wireing put this all together and now it wont start tryed the eka code woth no joy any ideas plz guys pulling what little hair left out thanks
 
Welcome:).

Post pics here of your lovely LR product:)
And tech questions in here
https://www.landyzone.co.uk/forum/land-rover-discovery.8/

Did it run ok before your problems? What happens when you try to crank it? Plus any other details and the good guys will help.

Enjoy it (soon):)

J
It ran fine before i changed the altanator and the injector harnes it wasnt chargeing hence check altanator and then we found the oil in the red plug so cleaned that changed the loom now the central locking on the fob dosnt work and wont start could this be a imobiliser problem and how can i fix this thanks
 
Don’t sound related to me but best to post your problem in thread I mentioned above.

That’s where the good guys hangout:)

J
 
Welcome to the forum
I7pha4t.jpg
 
Last edited:
Back
Top