I have a discovery 2 td5 it had altanator problems so took it off to get tested and i also changed the inlet man gasket and the fuel reg was leaking replaced the gaskets and seals andi also replaced the injector loom as oil was in the wireing put this all together and now it wont start tryed the eka code woth no joy any ideas plz guys pulling what little hair left out thanks
Hello fokes
- Thread starter Big al79
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Welcome
.
Post pics here of your lovely LR product
And tech questions in here
https://www.landyzone.co.uk/forum/land-rover-discovery.8/
Did it run ok before your problems? What happens when you try to crank it? Plus any other details and the good guys will help.
Enjoy it (soon)
J
.Post pics here of your lovely LR product
And tech questions in here
https://www.landyzone.co.uk/forum/land-rover-discovery.8/
Did it run ok before your problems? What happens when you try to crank it? Plus any other details and the good guys will help.
Enjoy it (soon)
J
brianp38dse
Well-Known Member
- Posts
- 19,625
- Location
- heathrow
Welcome to the forum
It ran fine before i changed the altanator and the injector harnes it wasnt chargeing hence check altanator and then we found the oil in the red plug so cleaned that changed the loom now the central locking on the fob dosnt work and wont start could this be a imobiliser problem and how can i fix this thanksWelcome
Post pics here of your lovely LR product
And tech questions in here
https://www.landyzone.co.uk/forum/land-rover-discovery.8/
Did it run ok before your problems? What happens when you try to crank it? Plus any other details and the good guys will help.
Enjoy it (soon)
J
