- Posts
- 2,427
- Location
- Isle Sheppy
Can anybody shed any light on part number locations on rear height sensors on my 1999 4-6 because I think there were 2 different types at around that time cheers
P38A Height sensors
- Thread starter pete12345
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Don't quote me but it depends wether the sensor has its own wiring tail or just a plug for the wiring harness I think.
- Posts
- 2,427
- Location
- Isle Sheppy
Yer that’s what I think I read somewhere mines got its own wiring plug on it
Henry_b
Think outside, no box required.
- Posts
- 15,509
- Location
- somewhere else
Just a word of warning..
Don't buy the cheap ones!
Don't buy the cheap ones!
- Posts
- 2,427
- Location
- Isle Sheppy
Will try get originals
- Posts
- 58,170
- Location
- Preston Lancs.
Height sensors changed in around 1996 all the same since. Later ones can be changed side to side but not front to rear. Early ones must be fitted in designated position and cannot be swapped over. Although i do believe kits can be obtained to fit later sensors on early vehicles.
- Posts
- 2,427
- Location
- Isle Sheppy
Cheers mine are the newer ones
