Heating Help

sickboydave · Nov 15, 2006

Does anyone know anything about heating on a series 111, i can't seem to get mine to blow any hot air, have checked all the pipes for blockages and they were ok, don't really know what else to check, any help would be great before it gets to cold.

Spyderman · Nov 15, 2006

Can you hear the Fan blower working?

ormus · Nov 16, 2006

there are 2 parts to the heating system. the heater matrix and the blower.
is one working and not the other? and which one? if any.

sickboydave · Nov 16, 2006

The fan is blowing ok, just cold air coming out.

Ashoofack · Nov 16, 2006

Is the engine getting hot?

Is the heater matrix getting hot?

slob · Nov 16, 2006

are you sure its not workin?? cos they're pretty crap at the best of times.

ormus · Nov 16, 2006

are you losing any water?

try flushing the matrix out first. then check the stat is not stuck open. next is the water pump.
last of all is maybe the engine is just not getting hot enough. try the silver foil trick.

sickboydave · Nov 16, 2006

Not losing any water and the engine temp runs in the middle of the gauge, i will try these and hopefully i might get some warm air.

brianthelandrover · Nov 16, 2006

Also check the valve that is operated by the hearter control is not siezed, and is operating (check the control cable isn't just slipping). If all else fails you might need to check the theromstat as if it is not opening you'll not get hot water to the matrix.

Heating Help

sickboydave

New Member

Spyderman

New Member

ormus

New Member

sickboydave

New Member

Ashoofack

New Member

slob

Well-Known Member

ormus

New Member

sickboydave

New Member

brianthelandrover

New Member

Similar threads