Heating controls

sarstad · Dec 16, 2010

hey

i have a problem with my heat in my p38

i have only real heat in the right site an only real blow in the right site .

what can be wrong ??

Sirus · Dec 16, 2010

sarstad said:
hey

i have a pob with my heat in my p38

i have only real heat in the right site an only real blow in the right site .

what can be wrong ??

http://www.youtube.com/watch?v=tu0n6oDTxi0:D:D

Ridesafe · Dec 16, 2010

Sirus said:
http://www.youtube.com/watch?v=tu0n6oDTxi0:D:D

Funny as fcuk, but feel old as fcuk remembering that!

Heating controls
hey

i have a problem with my heat in my p38

i have only real heat in the right site an only real blow in the right site .

what can be wrong ??

Hav yew triyd setttin ther tempracha? :behindsofa:

sarstad · Dec 16, 2010

Ridesafe said:
Funny as fcuk, but feel old as fcuk remembering that!

Heating controls
hey

i have a problem with my heat in my p38

i have only real heat in the right site an only real blow in the right site .

what can be wrong ??

Hav yew triyd setttin ther tempracha? :behindsofa:

it is on HI in both site

Datatek · Dec 16, 2010

sarstad said:
it is on HI in both site

There are hundreds of threads on blend motor problems, do a search or look at rangerovers.net.

magictiny · Dec 16, 2010

I have an interesting problem...
Well not a problem really, as the heating works fine - but the cheque book sign comes on but only when the outside temp goes below 3 degrees.
I haven't pluged the diagnostics in yet - too damn cold...

sarstad · Dec 26, 2010

hey guys

i thing my brain will have a melt down in a short wile

i have taken the blend motor out an taken it apart . no broken gear teeth and the motor work ......

but i cant adjust it when i put the temp op or down

what is wrong ???? any ideas

sarstad · Dec 26, 2010

:decision:

magictiny · Dec 31, 2010

sarstad said:
hey guys

i thing my brain will have a melt down in a short wile

i have taken the blend motor out an taken it apart . no broken gear teeth and the motor work ......

but i cant adjust it when i put the temp op or down

what is wrong ???? any ideas

You really need a Faultmate, so that the HEVAC can tell you which part is not working, there are a couple of sensors in there too that I didn't realise existed when I did mine.

magictiny · Dec 31, 2010

magictiny said:
I have an interesting problem...
Well not a problem really, as the heating works fine - but the cheque book sign comes on but only when the outside temp goes below 3 degrees.
I haven't pluged the diagnostics in yet - too damn cold...

OK - plugged it in now, apparently it is the clutch on the compressor stuck open - well that is OK cos I have a leaky valve on the air con that needs replacing...

Interesting that the HVAC needs air con when it sees that it is below 3c

wammers · Dec 31, 2010

magictiny said:
OK - plugged it in now, apparently it is the clutch on the compressor stuck open - well that is OK cos I have a leaky valve on the air con that needs replacing...

Interesting that the HVAC needs air con when it sees that it is below 3c

Fault. 'Compressor open circuit', means either there is low pressure in system or pressure switch has failed. System will not allow compressor to run without sufficient gas pressure.

Datatek · Dec 31, 2010

magictiny said:
OK - plugged it in now, apparently it is the clutch on the compressor stuck open - well that is OK cos I have a leaky valve on the air con that needs replacing...

Interesting that the HVAC needs air con when it sees that it is below 3c

Aircon is a great dehumidifier, maybe that is why the system calls it?

sarstad · Jan 2, 2011

there wase as some know no belt on the compressor

i found out yesterday..

i have renovated the blend motor wit a new potmeter to 1£

and it works great

her is the type that fits

BI TECHNOLOGIES/TT ELECTRONICS|39PLABR10KLF30|POT, TRIM, 10KOHM, 1 TURN, 30 | Farnell United Kingdom

sarstad · Jan 8, 2011

today i put the belt back on and the dam thing works

Datatek · Jan 8, 2011

sarstad said:
today i put the belt back on and the dam thing works

Nice one, use it often to keep it in good order

sarstad · Jan 8, 2011

Datatek said:
Nice one, use it often to keep it in good order

i run it all the time

Heating controls

sarstad

Active Member

Sirus

Your all Banned except me

Ridesafe

New Member

sarstad

Active Member

Datatek

Well-Known Member

magictiny

New Member

sarstad

Active Member

sarstad

Active Member

magictiny

New Member

magictiny

New Member

wammers

No longer with us, RIP

Datatek

Well-Known Member

sarstad

Active Member

sarstad

Active Member

Datatek

Well-Known Member

sarstad

Active Member

Similar threads