heater

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
because when i turn my heater fan on the fuel gage goes up so i though its goign to be a bad earth somewer and ideas?
 
erm...

You take out the console (Bit with clocks in) then on mine, its a screw with a handful of black wires going to it, that goes through the bulkhead, a wee bit further down. You can easily see it an get to it from the hole left by the clocks though.
 
u recon it just might be coroded?

Have a look at it ffs. It might be loose, rusty, damaged or fallen out altogether. You don't know until you get the clocks out and see what's going on. If it is loose or corroded you'll need to clean all the rust off the earth leads and the surrounding area and re fit it, maybe with a decent nut and bolt and a repair washer to make sure you've got a good solid earth point that won't go anywhere.
 
Back
Top