heater unit
- Thread starter b0nh4ch
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Station House
Well-Known Member
- Posts
- 3,960
- Location
- Fife, Scotland
Couple of hours tops
Andy Land
Well-Known Member
- Posts
- 4,499
- Location
- ... en route to Cuckoosville.
Station House
Well-Known Member
- Posts
- 3,960
- Location
- Fife, Scotland
Too true - never been able to remove bolts with my teeth - they keep snapping (teeth that is, not the bolts)
Andy Land
Well-Known Member
- Posts
- 4,499
- Location
- ... en route to Cuckoosville.
Too true - never been able to remove bolts with my teeth - they keep snapping (teeth that is, not the bolts)
In fact the only job you can do without tools is removing the doors on a Gaylander :behindsofa:
gramgramfirey
New Member
- Posts
- 72
- Location
- North East Victoria, Australia
Depends on the number of tea breaks!:beer2:
Litch
Well-Known Member
- Posts
- 2,235
- Location
- Oxfordshire
Yes, a couple of hours should see it done.
Don't forget to get new seals before you start. The original ones are bound to be hard & crispy and the correct parts are very cheap, using silicon (or similar) is a bodge which will make removing it in the furure a nightmare.
