jorjio_k
Active Member
- Posts
- 490
- Location
- Lebanon,middle east
hello
When i bought my rangy 6 months ago,the heater hoses on the bulkhead were blocked (inlet and outlet) to prevent water circulation to the matrix.well today i took my chances and re attached the hoses after flushing them and the matrix,then i have presurized the system using a presure gauge and no presure is lost.voila heater works.now wht is killing me is trying to figure out y it was closed,there r no leaks from the o rings nor the matrix at the moment,and blend motors and flaps r operating properly no book symbol,(knock on wood).
Am i counting my eggs before hatching or wht?i drove her 4 an hour today and it got presurized normaly and coolant level didn't drop,i deeply want to believe that it is cured,but i'm affraid to b shocked!
How long should i wait to b sure tht it isn't leaking?
Y the heater was put off if everything is working as it should?
Man the heater on the p38 is like a furniss.
Thank you gents
When i bought my rangy 6 months ago,the heater hoses on the bulkhead were blocked (inlet and outlet) to prevent water circulation to the matrix.well today i took my chances and re attached the hoses after flushing them and the matrix,then i have presurized the system using a presure gauge and no presure is lost.voila heater works.now wht is killing me is trying to figure out y it was closed,there r no leaks from the o rings nor the matrix at the moment,and blend motors and flaps r operating properly no book symbol,(knock on wood).
Am i counting my eggs before hatching or wht?i drove her 4 an hour today and it got presurized normaly and coolant level didn't drop,i deeply want to believe that it is cured,but i'm affraid to b shocked!
How long should i wait to b sure tht it isn't leaking?
Y the heater was put off if everything is working as it should?
Man the heater on the p38 is like a furniss.
Thank you gents
