Davidmarshall83
New Member
- Posts
- 10
Hi Guys and galls,
So another problem I'm in need of help. My heater fan wont work on any setting. I've read about a lot of problems with the resistor pack, but I don't believe that's the problem.
A few reasons. The failure was sudden. And fan speed 4 has a separate 12v feed from the Eng compartment. I believe that fan speed 4 should work even if the resistor pack is duff. I don't think its the motor as it was running sweat a couple of days ago. No whining or rough running.
The other problem is that the Fresh/Recirculated switch is also failing to operate. There both feed from a supply from fuse 4.
I've check the usual connections/fuses/
Any assistance most welcome. Cheers
So another problem I'm in need of help. My heater fan wont work on any setting. I've read about a lot of problems with the resistor pack, but I don't believe that's the problem.
A few reasons. The failure was sudden. And fan speed 4 has a separate 12v feed from the Eng compartment. I believe that fan speed 4 should work even if the resistor pack is duff. I don't think its the motor as it was running sweat a couple of days ago. No whining or rough running.
The other problem is that the Fresh/Recirculated switch is also failing to operate. There both feed from a supply from fuse 4.
I've check the usual connections/fuses/
Any assistance most welcome. Cheers
