Heater matrix removal for snorkel.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

MaxyMan

Well-Known Member
Posts
2,540
Location
Hampshire
Eavning all, I'm fitting a safri copy snorkel on my 2.5 n/a on the right hand side wing. Where the snorkel goes through the wing the heater matrix unit is there. As mine is broken anyway I'm going to remove it and plumb the.snorkel in. I'm asking how hard is it and how to remove the heater matrix off the bulkhead. the pipes are already disconnected all i need to do is remove it and I'm not sure how as I can't get a good look and see where its attached. Thanks for the help.
 
Thanks for that. Oh really? Where it goes through the pannel I swear the matrix is on the inside and will be in the way?? As mentioned mine broke anyway so I may aswell remove.it.
 
fitted a copy to my 90 but mine has the intake on the side of wing to fit to but it definitely fits under the plastic intake from the wing top ,it is easier to fit with the plastic intake removed but still awkward to do up the nuts anyway. give it a go mate.
 
Back
Top