Headlamp Conversion

Hi guys Im new to landys and forums

Just picked up my 1992 Defender 90 200Tdi a couple of months ago...

First issue with the landy were the sealed beams. One of the dipped beams went out so I got these as a replacement.

PM1039 | Halogen headlamp conversion kit (RHD) - with Ring Ultra Xenon bulbs

Do I need to fit a Relay or the wiring present is enough not to blow out any switches?

Thanks

just a stright swop mate just done same to mine

Many thanks... many people suggested a relay so I got confused..

Much appreciated!!

Using a relay is to make the headlights brighter - as they get full battery power supplied to em

great cheers

DEFENDER90-DAZ said:

Using a relay is to make the headlights brighter - as they get full battery power supplied to em

Click to expand...

+1 this is well worth while undertaking.

No its not its to stop your light switch contacts burning up.you wont notice a difference with the brightness.

matchmetisse said:

No its not its to stop your light switch contacts burning up.you wont notice a difference with the brightness.

Click to expand...

erm, yes you can, especially if the switch isnt the best.

the existing wiring isnt that butch, and even on a good day you get quite a bit of voltage drop through it.
most folk beef up the wiring feeding the relays, plus its a direct route so you get the full voltage at the lights.

My 1989 doesnt drop voltage like that, i'd be worried if i was you!

matchmetisse said:

My 1989 doesnt drop voltage like that, i'd be worried if i was you!

Click to expand...

Yes worry and then ...............fit a relay and wire direct from the battery through it

No need, i have good connections and earths to my lights

djbarren said:

+1 this is well worth while undertaking.

Click to expand...

You do realise this thread is nearly 12months old don't you fella