hazard switch
- Thread starter GEEZEER
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
td4van
Well-Known Member
- Posts
- 1,566
- Location
- Gloucestershire
Hi the seatbelt light isn't used on UK spec Freelander 1
As for the hazard switch it should illuminate when sidelights are on but the only flash to my knowledge is on the dash
As for the hazard switch it should illuminate when sidelights are on but the only flash to my knowledge is on the dash
stannswhite
Well-Known Member
- Posts
- 622
- Location
- leeds
try fastening the seat belt,it should go off,the
hazard warning light does flash in time with
the indicators.
stannswhite
Well-Known Member
- Posts
- 622
- Location
- leeds
i dont know if its an M.O.T fail/advisory if the dash
triangle does not light up,but i would also not bother
with it as long as all the indicators flash when on.
triangle does not light up,but i would also not bother
with it as long as all the indicators flash when on.
Dougden
Active Member
- Posts
- 440
- Location
- North Kent
I am with TD4Van on this. On the facelift, the switch should be illuminated but not flash. Just the lights on the dash will flash in time with the clicking. Don't waste your money buying a new switch, as it is unlikely to change what you have now.
