THEengineer
whatever
- Posts
- 4,978
- Location
- near big mountains and lots of mud
strange got normal indicators but my hazards are not working,if i put the hazards on indicators stop and nothing happens dodgy switch maybe
hazard switch fault
- Thread starter THEengineer
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
muckmuck
Active Member
- Posts
- 798
- Location
- chatteris cambridgeshire
I had similar issue and replaced hazzard switch and all returned to normal.
THEengineer
whatever
- Posts
- 4,978
- Location
- near big mountains and lots of mud
will give that a go
top drive
Well-Known Member
- Posts
- 2,694
- Location
- Peoples republic of culter
What age , pre 94 have separate fuses for indicator and hazards,
THEengineer
whatever
- Posts
- 4,978
- Location
- near big mountains and lots of mud
Tripp
Active Member
- Posts
- 129
- Location
- Exeter-ish
The hazard switch is pretty cheap on ebay, might be easiest to change it rather than try to fix the switch
Landyfox
Well-Known Member
- Posts
- 4,489
I had the exact same problem mate. It's a dead easy fix, you simply strip the switch down and clean the contacts and hey presto it will work. These switches get full of crap and affect the copper contacts. There's a guide on the interweb, but it's really simple and quick. I replaced my bulb at the same time.!! 
THEengineer
whatever
- Posts
- 4,978
- Location
- near big mountains and lots of mud
cheers guys will try cleaning it
THEengineer
whatever
- Posts
- 4,978
- Location
- near big mountains and lots of mud
found the fault,a fuse had melted in the fusebox,somebody's powered the radio off the hazard circuit,because the indicators were working i though the hazards were on the same circuit
Similar threads
