Has anyone got a spare one these?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
benjaminpalma

benjaminpalma

Member
Posts
11
Location
Newcastle
LT230 transfer case power take-off cover FTC3178? I need to take my overdrive off for repairs. Thanks!
ftc3178.jpg
 
Thanks for the suggestion. By the miracle of Facebook, someone's sold me a secondhand one, and his old input gear and bearings - which I'm hoping is all need to take the place of my GKN overdrive.
 
benjaminpalma said:
Thanks for the suggestion. By the miracle of Facebook, someone's sold me a secondhand one, and his old input gear and bearings - which I'm hoping is all need to take the place of my GKN overdrive.
Click to expand...

Is the input gear cross drilled? If not I’d replace with one that is... only £45 from Ashcroft also is just put new bearings in. They’re not expensive then you’re sorted.

Edit - didn’t read this is a temp thing. If you don’t put the over drive back in do the above.
 
Last edited:
If it isn't cross drilled and is only a temporary measure while the overdrive is being repaired then you should get away without replacing it, just make sure the splines are greased when you assemble it
 
Wise words - thanks, guys. Am in two minds about putting it back as I do so little motorway driving and is something else to go wrong. But it is very good on the motorway...
 
You must log in or register to reply here.

Similar threads

Thornegator
Searching for Gearbox/Transfer case specialists, please.
Replies
5
Views
413
tottot
tottot
S
Knocking in reverse
Replies
3
Views
288
Brown
Brown
F
Power Steering Box.
Replies
7
Views
474
Fortunastephen
F
P
LT230 Tachograph Sender (Drivers Hours not RPM...)
Replies
9
Views
798
Paul in Sussex
P
M
Discovery1 lt230 in place of LT230R from a 12D?
Replies
3
Views
480
MrF
M
Back
Top