Gunk

I know the stuff is good for cleaning engines but is it any good for
cleaning the chassis prior to painting as you cannot exactly run the chassis
till it warms up ?


--
Larry
Series 3 rust and holes

"Larry" <[email protected]> wrote in message
news:[email protected]...
> I know the stuff is good for cleaning engines but is it any good for
> cleaning the chassis prior to painting as you cannot exactly run the
chassis
> till it warms up ?

Your not trying hard enough ;-)

Yes you can use it but the effect is better when warm... Personally I use
paraffin and some soapy water afterwards. A Jerry can of Paraffin cost far
less than Gunk and is just as effective. Apply with a <Martin switch off
now> old paintbrush.

Lee D.

--
________________________________
www.lrproject.com
Just a little hobby site about Landies
________________________________