greased the prop shafts ... anywhere else

Just after a bit of advice, i have been under and greased the prop shafts i was just wondering if there was anywhere else i need to grease up??

Cheers

No that's about it.

door hinges and catches they dry up but there are no nipples

defender300td1 said:

door hinges and catches they dry up but there are no nipples

Click to expand...

That's why it's best to oil them.

Track rod ends, if applicable.

Unapplicable.

I find oil runs grease stays put and most car factory's use grease not oil that's just an opinion each to their own.

defender300td1 said:

I find oil runs grease stays put and most car factory's use grease not oil that's just an opinion each to their own.

Click to expand...

Door hinges unless they are fitted with grease nipples are always oiled on service. Best to use EP 90 though. Not my opinion that's the way it is. Grease cannot get down the hinge pins oil can. Pardon the pun.

You must be a good oil squirt'r what about the latches?

Is this a P38 or classic that needs grease on the propshafts?

Andy P38 said:

Is this a P38 or classic that needs grease on the propshafts?

Click to expand...

Both.

defender300td1 said:

You must be a good oil squirt'r what about the latches?

Click to expand...

Oil.

Mark you can get pattern trackrod ends with grease nipples or you can drill a 6mm hole and tap a thread and insert your own for longer lasting ones

wammers said:

Both.

Click to expand...

Thank you.

Cheers guys for all the feedback, i'll put the grease gun away till the next service