Getting ready to Hand Paint

I just t washed mine down wi white spirit and painted it wi a 3/4” brush. No problem.

Fatrover said:

I just View attachment 275308 View attachment 275309 t washed mine down wi white spirit and painted it wi a 3/4” brush. No problem.

Click to expand...

Lovely job there Mate. I used white spirit to before priming,
Got first top coat on today, going to get another 1 maybe 2 on during the week

border said:

Lovely job there Mate. I used white spirit to before priming,
Got first top coat on today, going to get another 1 maybe 2 on during the week

Click to expand...

I preferred the sanded beat up look
Looks good though

border said:

Lovely job there Mate. I used white spirit to before priming,
Got first top coat on today, going to get another 1 maybe 2 on during the week

Click to expand...

Looking great, my first series was Atlantic Green, it’ll be grand when your finished! I didnt have a garage when I did mine so I did the whole thing on a nice day! Still looks fine a year later !

I don't know how you boys manage to get such a good finish with brush and roller. Good on yer. I've tried and it looked like I had put the paint on with a brick. I'm back to spraying now. Well done.

Looking great with the paint on ,how's was the temp gauge when you ran it round the field

mystery said:

Looking great with the paint on ,how's was the temp gauge when you ran it round the field

Click to expand...

Hello Mate, Thanks, did not get to drive around the field, as only got 3 nuts holding each wheel on temporarily but was tempted too, should not be long before I can get it out for a run to test it,
Last time I let it idle it was not as bad, will try again and see if this colder weather makes a differenceas last time it was red hot.

border said:

3 coats of primer, Can anyone notice the stupid mistake though?

Click to expand...

Forgot to prime the truck cab, painted over the rubber grommets in the wing, painted the galv cappings, caught the edges of the already top coated inner wings?
You can’t say that and then not tell us. Although the fact we can’t obviously spot it means it is probably only noticeable to you.

dag019 said:

Forgot to prime the truck cab, painted over the rubber grommets in the wing, painted the galv cappings, caught the edges of the already top coated inner wings?
You can’t say that and then not tell us. Although the fact we can’t obviously spot it means it is probably only noticeable to you.

Click to expand...

Yove mentioned things that I had not even noticed the main thing was painting over the galve cappings so I spent a couple of hours sanding them back again. yes did forget the cab, the sides and roof need sanding to paint in Limestone white.
Second coat 1 more to go.
Still got bonnet and other bits to do yet