Series 3 Gearbox rebuild advice

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin said:
end float for 1st 2nd and 3rd gears is vital needs to be at least 2 thou but not greater than 8
Click to expand...

jamesmartin said:
end float for 1st 2nd and 3rd gears is vital needs to be at least 2 thou but not greater than 8
Click to expand...
How do you reduce the endfloat on 1st gear? Mine is around 10 thou. Is the wear normally on the mainshaft gear 591362 where it runs against the grooved thrust washer 576735? And ok to renew on its own? (you don't have to renew in pairs - mainshaft/layshaft?) thanks
 
Last edited:
You must log in or register to reply here.

Similar threads

S
gearbox mounts
Replies
7
Views
464
Wildefalcon
W
Kiwi Landie
Series 3 Rebuild Series 3 Suffix B gearbox as Suffix D
Replies
8
Views
446
Kiwi Landie
Kiwi Landie
Frisol
Series 2a Gearbox Rebuild - Front Output
Replies
8
Views
1K
boguing
boguing
S
starter motor questions
Replies
16
Views
542
sprie
S
S
Gearbox Retaining Plate Location
Replies
4
Views
367
sprie
S
Back
Top