Gearbox and transfer box replacement advice

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
G

greenskye

New Member
Posts
4
Location
Highlands
Hi Guys,

Recently joined the forum and looking for some advice regarding replacing my gearbox and transfer box (1995 300TDI). Got another box(and transfer box) coming soon and wondered what bits I might need for the refit and also what other jobs would be worth doing whilst it is in bits? Already had the clutch done 300 miles ago.

Any advice welcome

Thanks
 
fresh oil and dont seal between the two, weld a piece over pivot on release fork if not already,and what do you want for old ones if not seized up
 
jamesmartin said:
fresh oil and dont seal between the two, weld a piece over pivot on release fork if not already,and what do you want for old ones if not seized up
Click to expand...
Thank you for the reply - what do you mean dont seal between the two? Gear box not seized. transfer box is fine between hi and low but diff lock mechanism seized. (that was my next job). What are they worth bearing in mind carriage cost from Highlands to you will be in the order of £70. Was thinking in the region of £100 plus carriage on top, all reasonable offers considered.:fencing:
 
You must log in or register to reply here.

Similar threads

Felixlong44
Loose transfer box cable?
Replies
6
Views
942
dag019
dag019
O
300 tdi transfer box
Replies
4
Views
855
old chap
O
L
Grinding when clucth is in!
Replies
8
Views
1K
miktdish
miktdish
O
110 Sounds like a tram
Replies
5
Views
941
tottot
tottot
M
1.6 lt230
Replies
4
Views
1K
lynall
L
Back
Top