puslinch
Member
- Posts
- 14
I'm after a single lamp holder for a Land Rover clock for my 90, I'm having a devil of time finding one. Advise on what it's called over here, remember I come from one the colonies!
~Gary
~Gary
Last edited:
Gauge lamp socket/Clock
- Thread starter puslinch
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 10,639
- Location
- Oxfordshire
bulb holder?
Last edited:
puslinch
Member
- Posts
- 14
Getting closer, I'm after one and can't seem to locate one. Measures around 10mm opening in the clock and has a ground ring. Clues please......
- Posts
- 10,639
- Location
- Oxfordshire
i could only find dash ones, not a one for the clock which seems to be different :/
Station House
Well-Known Member
- Posts
- 3,960
- Location
- Fife, Scotland
are any of the ones on this site what you need - 5 pages of bulbs and holders
Land Rover Parts, Accessories and Information
Land Rover Parts, Accessories and Information
puslinch
Member
- Posts
- 14
As unbelievable as this answer, none. The truck is a mid 80's and looking behind the dash today the socket for the speedo is the right one. Single lead that pushes in to the gauge.
I also have a clock from a P38 and it's the same socket/holder required. Still hunting!
~Gary
I also have a clock from a P38 and it's the same socket/holder required. Still hunting!
~Gary
Did you have any luck with finding the holder? Looking for the same part myself!
puslinch
Member
- Posts
- 14
none so far, except buying a loom......Help!
LNH
Member
- Posts
- 86
- Location
- derbyshire
go you mean the bulb holders that fit into the 52mm gauges?
if yes i have a spare!
if yes i have a spare!
