Fuse 26 and relay 19

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
We have pulled the doner engine and almost ready to lift the blown engine out of my RR, all going according to plan so far, hoping to have her up and going again tomorrow.
 

Attachments

  • 610BF0EB-C8A4-404D-A499-4349722BD6E1.jpeg
    610BF0EB-C8A4-404D-A499-4349722BD6E1.jpeg
    542.8 KB · Views: 60
  • A3D1241A-36D6-42D4-9E2A-9811EB8C8704.jpeg
    A3D1241A-36D6-42D4-9E2A-9811EB8C8704.jpeg
    534.3 KB · Views: 61
Looking at the colour it looks like its a bordeaux , has it got red carpets and pipeing to the seats and a red inset on the wheels.
 
It looks very similar to that, and the specs sound the same, I will check the book. This is a picture of interior
 

Attachments

  • A75F7CB8-62BE-4219-94E6-51ECA20A5906.jpeg
    A75F7CB8-62BE-4219-94E6-51ECA20A5906.jpeg
    351.8 KB · Views: 60
With cream carpet and black piped seats its not a bordeaux.
I would love the red carpet and red piping it looks so nice:)
 
Update: We did the engine swap this week and finished it all off today, now running and driving great with no leaks or noise, we had a loud rattle at first but after changing the crank pulley all seems to be well. It is spitting oil out of the filler cap when you take the lid off and the engine is running, I cannot remember my old engine doing this. Any thoughts? Thanks!
 
Update: We did the engine swap this week and finished it all off today, now running and driving great with no leaks or noise, we had a loud rattle at first but after changing the crank pulley all seems to be well. It is spitting oil out of the filler cap when you take the lid off and the engine is running, I cannot remember my old engine doing this. Any thoughts? Thanks!
Don't forget the camshaft is spinning below the oil cap. ;)
 
Back
Top