fuel problem p38 4.6

hi guys bit ov a prob 4.6 hse on gas when i`m on petrol if left cold starts no bother when it`s warm wont start as if it`s just throwing in neat petrol can just smell neat fuel and black smoke from exhaust and it won`t go any ideas anyone? fires it`s if iot`s flooded cheers

bit ov an update if i have it running warm switch off and restart striaght away no problems if i leave for a few minutes then it will not go but if i push my foot to the floor on the gas then eventually it will start?

when it eventually starts does it run ok on gas, the problem being hot on petrol?

if so i had the same fault,
had some joker from RCR motors in rainham, essex, richard i think his name was, tell me i needed new injectors @ £164 EACH, conning git. £80 maim dealer parts, wanted £200 labour as well...

worked out to be bad connection at the air flow metre!! simple as that.

redrange said:

when it eventually starts does it run ok on gas, the problem being hot on petrol?

if so i had the same fault,
had some joker from RCR motors in rainham, essex, richard i think his name was, tell me i needed new injectors @ £164 EACH, conning git. £80 maim dealer parts, wanted £200 labour as well...

worked out to be bad connection at the air flow metre!! simple as that.

Click to expand...

m8 your smack on we had a look at it yesterday and found the plug had came off the air flow meter to be fair we thought sticking injector over fueling it but yes m8 same bother the plug reconected it and iv`e took it out today with no problems at all cheers for that anyhow m8 there`s a few nice helpfull people on the site which is great

redrange said:

when it eventually starts does it run ok on gas, the problem being hot on petrol?

if so i had the same fault,
had some joker from RCR motors in rainham, essex, richard i think his name was, tell me i needed new injectors @ £164 EACH, conning git. £80 maim dealer parts, wanted £200 labour as well...

worked out to be bad connection at the air flow metre!! simple as that.

Click to expand...

name and shame mate

tev said:

m8 your smack on we had a look at it yesterday and found the plug had came off the air flow meter to be fair we thought sticking injector over fueling it but yes m8 same bother the plug reconected it and iv`e took it out today with no problems at all cheers for that anyhow m8 there`s a few nice helpfull people on the site which is great

Click to expand...

glad you got it sorted, the worse thing i recon is the not knowing!!
and it dont help when some complete ripp off wan**r thinks he can do you for over a grand, and he said if it still no good fit new oxysensors, FOOL...
any way glad ya sorted. ii usally drive around with a tin of this
Maplin > Isopropyl Alcohol
in door bin, any electrical connection probs just go away!!

rick071155 said:

name and shame mate

Click to expand...

RCR motors, junction of cherry tree lane/new road(A1306) rainham essex, RM13.
charged me £40 for reading fault codes AND £30 labour, should have charged him back 1x punch to nose......
what a con man.....
i phoned him and suggested his diagnostic equipment was "****e" he didnt say much then a while later he called back wanting to know where i took it! worried i would say, wish i had took it somewhere as it was i sussed it meself....

cheers for that me i`ll invest in sum ov that