v8tricky
New Member
- Posts
- 104
- Location
- marple cheshire
wot should the fuel pressure be on a 3.5 carbed v8
fuel pressure
- Thread starter v8tricky
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
clutchdust
Well-Known Member
- Posts
- 1,335
- Location
- south wales
depends what carb(s) your using. mine has a 4 barrel weber and I run it at around 5psi. You'll know when it's too high as the excess pressure will overcome the float needles causing flooding and/or seriously high fuel consumption
v8tricky
New Member
- Posts
- 104
- Location
- marple cheshire
i have 4 barrel webbers and it was running at 1.5 psi but ive sorted the problem. it was the filter on the end of pump was blocked. cut it off and its now running between 4 and 5 psi. thanks for the reply
