Fuel lift pump to engine block part number help!

Hi I have an oil leak from the join between the square side cover that the fuel pump and the engine block so I'm going to replace the gasket. Spent an hour last night trying to find the part in my parts catalogue and online with no joy. Does anyone e know the part number? It's the item labelled 7 in the picture attached, from the Series 3 workshop manual. Engine is 2.25L series 3 petrol.

Not sure if Kelloggs boxes come with a number.

My five bearing 2 1/4 engine has a different shape back plate than that. More triangular than square. But it is a diesel.

Just found a similar shaped one on Darwen Diesels website.

Parts book here
http://www.retroanaconda.com/landrover/2010/03/series-iii-parts-book/

gasket sealant would work there loctite si 5980 very Good

Just grab a sheet of gasket paper and make your own.

WoodyO said:

Just grab a sheet of gasket paper and make your own.

Click to expand...

But isnt that wot @Bobsticle said, Mind not sure of the quality of cereal boxes these days so maybe double up.

J

Not sure who would oil the drive if I didn’t have a series. Can’t imagine the weed problems I could have.

Thanks all! Especially the Kelloggs suggestion. Other brands available.