itsawindupuk
New Member
- Posts
- 2
Hi everyone, I was wondering if anybody knows the inside diameter of the panhard rod bush eyes? Im trying to make some custom suspension but want to use off the shelf parts.
Thanks
Adam
Thanks
Adam
front panhard rod eye diameter
- Thread starter itsawindupuk
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Pretty sure they take an M12 bolt..
itsawindupuk
New Member
- Posts
- 2
sorry I meant the diameter of the panhard rod eye WITHOUT the bush in it.
eddyoz
Member
- Posts
- 17
- Location
- Mandurah Western Australia
Panhard rod bush eye is 30mm,the hole for the steel sleeve is 19mm and it takes a 14mm bolt.That is on a 1999 110 Defender,using poly bushes.
Last edited:
