MLangford2
New Member
- Posts
- 87
Hey,
Cannot seem to get my driver side front door to hang properly AND stop the bottom hinge from moving. The door hangs fine and opens / closes freely but no matter how hard I try the bottom hinge moves. To be precise its the upper bolt where the hinge bolts to the bulkhead, I get it tight (very tight!) But the whole hinge just pivots on the lower of the two bolts securinfg the hinge to the bulkhead so the hinge just moves on the plastic gasket that goes between the hinge and post when you ppen or close the door. Any help would be very appreciated! Hope that all makes sense..Thank you.
Cannot seem to get my driver side front door to hang properly AND stop the bottom hinge from moving. The door hangs fine and opens / closes freely but no matter how hard I try the bottom hinge moves. To be precise its the upper bolt where the hinge bolts to the bulkhead, I get it tight (very tight!) But the whole hinge just pivots on the lower of the two bolts securinfg the hinge to the bulkhead so the hinge just moves on the plastic gasket that goes between the hinge and post when you ppen or close the door. Any help would be very appreciated! Hope that all makes sense..Thank you.
