front bumper removal

just come to remove front bumper to fit some light brackets the top screws come out ok the others i can find i'll have to cut out and redo
anyone got a pic of where the screws are as i'm bound to miss some and would rather know where they are before i start
cheers

hi you need to take the screws out of the wheel arch linings then at the top of bumper (under Bonet) then there are one each side behind the headlamps hope this helps

and I for got the ones at the bottom from side to side

If the fitttings are the originals they tend to be poor quality and require some hacking to remove. Replacing with galvanised or stainless screws and bolts makes bumper removal very simple in the future.

looks like its going to be lots of cutting as the screws won't budge and like you say replace them with s/s screws a simple job turns in to a nightmare

did'nt turn out as bad as it could have ,had to cut out the 2 screws both sides where it fixs to the inner wheel cover, cut out the 3 plastic screws under the grill got to the bolts at the side of the headlights, i left the screws in at the bottom of the inner wing cover
a right pig of a job but its of + on +spotlights fitted now for the wiring!!!!!