front ball joint

phil13 · Jan 10, 2013

Brought up as a advisory on MOT wear in lower l/h ball joint. Ase they easy to replace or are special tools required? cheers phil

Grit Valve · Jan 10, 2013

Phil I can get the tools for this job there 78 quid intrested? as long as you don't adjust the lining collet all goes back as one .

stopover · Jan 10, 2013

Look at this link, has lots of photo's and advice. Think Defender300tdi is a good offer, I would take him up on that.

Ball joint Removal/replacement

Grit Valve · Jan 10, 2013

phil13 · Jan 10, 2013

Hi that ebay page belongs to you??

Grit Valve · Jan 10, 2013

phil13 said:
Hi that ebay page belongs to you??

No I ment I know where to get one, I've now had the pleasure of using it perfect no heat nothing

phil13 · Jan 10, 2013

I see,
the link is to the one that you know of and which i should get, you have used one the same and it worked a treat ? cheers phil..

wammers · Jan 10, 2013

phil13 said:
I see,
the link is to the one that you know of and which i should get, you have used one the same and it worked a treat ? cheers phil..

Just make sure the thread is well lubed with graphite grease at all times and it will last for ever.

Grit Valve · Jan 10, 2013

phil13 said:
I see,
the link is to the one that you know of and which i should get, you have used one the same and it worked a treat ? cheers phil..

Yes used it fantastic as wammers says a bit or grease on threads helps no end