alarmfitter
New Member
- Posts
- 434
- Location
- romford essex
Any info on removing the drivers arm rest so I can have it retrimmed would be helpfully 
Front arm rest
- Thread starter alarmfitter
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
Any info on removing the drivers arm rest so I can have it retrimmed would be helpfully
Don't know how to remove it but i reconditioned mine in place, is yours torn or just scuffed?
alarmfitter
New Member
- Posts
- 434
- Location
- romford essex
It's torn on the end
ScotsJamie
New Member
- Posts
- 24
- Location
- Castle Douglas, Dumfries & Galloway
There is info in the workshop manual about removal of the armreast I think.
Mine is quite loose when leaned on, so I need to look into this too.
Mine is quite loose when leaned on, so I need to look into this too.
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
ok, mine was scuffed on the side and on top so i repaired it with a leather treatment matched to the land rover colour which worked well but not for tears or rips unfortunately..
alarmfitter
New Member
- Posts
- 434
- Location
- romford essex
Thanks for the replys
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
get yourself a copy of the repair manual, i bought a disc of egay for a couple of quid but think you can download, i think they refer to it as RAVE.
below is all i could find in the manual
below is all i could find in the manual
alarmfitter
New Member
- Posts
- 434
- Location
- romford essex
Cheers for that
holidaychicken
Well-Known Member
- Posts
- 4,014
- Location
- Kent
no bother, good luck
alarmfitter
New Member
- Posts
- 434
- Location
- romford essex
I will take some pictures if I have a go at it
