Fix it with a wrench

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
True or false :p

If the exhaust filter is blocked the system cannot vent the gallery . The eas system will log a fault as the pressure switch in the system will recognise the system not venting . This will cause suspension to raise up and stay at full height. I've had four of them brought to the Landrover specialist I work for . ;)
It won't sense the Pressure not reducing...the pressure switch is purely on/off for the Compressor I believe....

It will log a fault if the ECU detects no change in height over X time though...!!
 
It won't sense the Pressure not reducing...the pressure switch is purely on/off for the Compressor I believe....

It will log a fault if the ECU detects no change in height over X time though...!!

Pressure switch is after NRV1 so it has no idea the gallery is full. It's bull****. Suspension cannot go to high even if the solenoids all open, there is not enough volume of air in the gallery and drier to do that.
 
Back
Top