F
Fanie
Guest
Hi as per the post I have a 8274 that I pulled off my series III prior to
flogging it. I am told that these are a little heavy for the disco front
suspension. Is this true? Would I have to install new springs?
The next concern is how badly installing one of these would affect my
cooling. I know removing it from my Nissan LD28 converted SerIIIS made a
huge improvement to the cooling and since most of the TDI ailments seem to
be overheating related, I am loath to loose any more cooling. I installed a
engine managment system and I have already had to replace the 95deg cooling
switch with a 105 deg one as the 95 deg one came on at the mere sight of a
hillock.
If it is dooable, my final objection would be paying a fortune for a ARB,
TJM bumper etc. I would like to construct something myself that would get
the winch as low as possible and channel as much air as possible to the rad
without wrecking the looks too much.
Any Ideas?
Stephen
flogging it. I am told that these are a little heavy for the disco front
suspension. Is this true? Would I have to install new springs?
The next concern is how badly installing one of these would affect my
cooling. I know removing it from my Nissan LD28 converted SerIIIS made a
huge improvement to the cooling and since most of the TDI ailments seem to
be overheating related, I am loath to loose any more cooling. I installed a
engine managment system and I have already had to replace the 95deg cooling
switch with a 105 deg one as the 95 deg one came on at the mere sight of a
hillock.
If it is dooable, my final objection would be paying a fortune for a ARB,
TJM bumper etc. I would like to construct something myself that would get
the winch as low as possible and channel as much air as possible to the rad
without wrecking the looks too much.
Any Ideas?
Stephen
