Fitting new brake adjusters to 110 rears

Fitting new rear brake adjusters to the 110 rear axle (1984) this weekend

Any tips on what goes where as I have a box full of bits...?
I've sorted the bits into fours and in each pile I've got a main bolt, a collar type washer, a spring, another washer, a small bolt that goes in the end of the main bolt/shaft and a snail thingy.

I suppose it may be obvious when I start the job but fore warned is fore armed as they say so what goes where please anybody.?

if you want a picture of the brakes send me your email and i will send the pic of what goes where

brnocz said:

if you want a picture of the brakes send me your email and i will send the pic of what goes where

Click to expand...

Got an exploded view of brakes but not of adjusters.

i've got the tiny set of instructions that came with the last set i got in the garage - i'll get a scan of it in the morning - but if they are simillar to the ones i've fit it'l be stepped stud thing through the hole (long side on caliper side of brake mounting plate) - then the spring - then the larger of the 2 cams then a washer then the bolt goes into the stud and pulls the cam onto the step which is an interferance fit

the bolts supplied with the cheap adjusters tend to snap befor they pull the cam onto the step far enuough - make sure the cam is square to the step before you start applying force

dunno if any of that makes sense