Fitting Lap Belts to ex mil 110

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
YorkshireMadMick

YorkshireMadMick

New Member
Posts
6
Location
Norwich
Just bought some lap belts from exmoor trim. They look good. But how do I fit them?
Do I need to drill the floor and put nut underneath, thus bolting through the floor?
I've 8 to fit :confused:
 
Last edited:
livers said:
Have a search if it is not toooo much trouble, lap belts are only appropriate in registered sex club and Yorkshire green lanes.
Click to expand...

Tried searching first, then had a brainwave, might find some advice on here, not many Yorkshire green lanes in sunny Norfolk I'm afraid :lalala:
 
Assuming they're for side facing seats be aware that they are not recommended for children.

I fitted 3 point harnesses in my 109 and used spreader plates where I bolted through the wheel arch
 
Dan_Trials said:
You might have more luck posting in 'General' or 'Defender' sections as this section (LZIR) is for people who need help in the form of recovery or emergency repairs etc. More chance of people with answers seeing your post in the right place.
Click to expand...

Cheers Dan, I am a newbee and did not know where I was posting when I posted this :eek:
 
You must log in or register to reply here.

Similar threads

jimbojams
Loc and fold seat with no parts
Replies
0
Views
563
jimbojams
jimbojams
T
Any problems changing from 265/75/16 on disco 1 alloys to 235/85/16 or 7.5 r16 on steels?
Replies
3
Views
396
Dr Strangeglove
D
A
No last row? Early Puma model quirks
Replies
3
Views
532
arrowland
A
T
Adding rear seats to my Series 3 88"
Replies
17
Views
2K
300bhp/ton
300bhp/ton
Muppetdaze
Three front seats in a 110 with belts..how?
2
Replies
20
Views
1K
FFS Heidi
FFS Heidi
Back
Top