dale809
New Member
- Posts
- 37
- Location
- salford, manchester
do i need a spring compressor to fit new front shock absorbers? and is it a hard job to do? cheers
fitting front shock absobers
- Thread starter dale809
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Griffdowg
New Member
- Posts
- 7,194
- Location
- Somewhere in Bristol
probably not, but it certainly will help! Yes it is easy. undoing the old shocks may not be so easy though. just follow the manual. and always replace them in pairs!
G
G
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
No just jack the front up and put the axle stands under the chassis. the weight of the axle will pull it down once the shockers are undone. top nut is usually the worst one to undo, A stilson on the shocker usally sorts it out though. If you're changing the springs as well get new turret rings and nuts as you almost always snap a couple of the bolts off.
dale809
New Member
- Posts
- 37
- Location
- salford, manchester
cheers for replys, ive just found an old post with step by step pics
Griffdowg
New Member
- Posts
- 7,194
- Location
- Somewhere in Bristol
good man 
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
dale809
New Member
- Posts
- 37
- Location
- salford, manchester
some smart arse haha, good tip on the turret bolts would of bin bolloxd without new ones some bolts are already missin!
cheers
haha, good tip on the turret bolts would of bin bolloxd without new ones some bolts are already missin!cheers
Tig9619
Active Member
- Posts
- 642
- Location
- Royal Forest of Dean
be careful with your flexi hoses when you drop the axle down as if they are standard length you may damage them.
