dougdotcom
Active Member
- Posts
- 605
- Location
- Langley Mill. Nottingham
found this hope im not duplicating. Fog Light Fitting.
fitting Fog Lights
- Thread starter dougdotcom
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P38Penguin
Active Member
- Posts
- 305
- Location
- West Midlands
Handy to know, mines got the front ones fitted but no switch on the dash so don't know if they actually work or not.
mick
mick
JohnnyCrash
New Member
- Posts
- 1,917
You have an Auto with fogs lamps fitted?
- Posts
- 58,170
- Location
- Preston Lancs.
No problem if it's a V8, problematic on a diesel if you do a lot of towing.
JohnnyCrash
New Member
- Posts
- 1,917
- Posts
- 58,170
- Location
- Preston Lancs.
his profile says 2.5 DSE auto
I have one fitted with fogs they are not a problem as long as you don't do a lot of towing and the bumper cover is vented.
JohnnyCrash
New Member
- Posts
- 1,917
- Posts
- 58,170
- Location
- Preston Lancs.
I've fogs on my 2.5 auto, but I didn't fit vents I just moved the oil cooler
Venting the bumper cover is somewhat easier.
P38Penguin
Active Member
- Posts
- 305
- Location
- West Midlands
Yeah, I thought it was odd, as I say though, don't know if they actually work. Don't plan on towing anything if that helps. How do you go about venting the bumper cover?
mick
mick
- Posts
- 58,170
- Location
- Preston Lancs.
Cut vents in it and fit a grille behind them.
JohnnyCrash
New Member
- Posts
- 1,917
they will work if you have the high-line BECM
get a switch off ebay and have a go! I did and they just worked
gfromleeds
Well-Known Member
- Posts
- 2,234
- Location
- leeds. westyorkshire, uk
+1 so did minethey will work if you have the high-line BECM
get a switch off ebay and have a go! I did and they just worked
High line becm just plug in and work provided the conectors behind the bumper haven't corroded
One of mine had I just cut the plug out and joint with a bullet connector
JohnnyCrash
New Member
- Posts
- 1,917
P38Penguin
Active Member
- Posts
- 305
- Location
- West Midlands
I've got no idea which one I have, but I will most certainly give it a go, off to scour the wonders of ebay
mick
mick
gfromleeds
Well-Known Member
- Posts
- 2,234
- Location
- leeds. westyorkshire, uk
Look at the becm. Its under the drivers seat
It will have a sticker on to with numbers and a barcode also a large L or H =lowline/highline
im sure someone will post a pic soon of what to look for
It will have a sticker on to with numbers and a barcode also a large L or H =lowline/highline
im sure someone will post a pic soon of what to look for
gazzab79
New Member
- Posts
- 700
- Location
- manchester
I've got a spare switch u can have.
