Fitting a snorkel

Will be fitting my snorkel tomorrow. For those who have fitted them how hard are they to fit and how long do they take roughly? Also if anyone has any tips to make fitting it easier please let me know.

Jol

Forgot to say its going on a 300tdi disco.

Jol

Is a pre-built one then? Should be straighfoward!

Its a safari..

Jol

if its non abs one mine took me about 1 half hours with a cuppa inbetween

Be careful with the hole templates ... the five (maybe 6) bolt/screw holes don't always line up. Check it, measure it then get someone else to check and measure it before you re-check and measure and before drilling/cutting ..

Be careful cutting the airbox to fit the Safari square inlet, take too much away and it won't seal well at all.

Thanks for the suggestions all taken on board and appreciated.

Jol

dont forget some mastic

discojol said:

Thanks for the suggestions all taken on board and appreciated.

Jol

Click to expand...

Let me know how it goes. Snorkel and wading kit are the next jobs for me to do on mine.

i fitted mine a few week ago on 300 and the one on vitara a few month ago and it looks a bit hard when you look at first but it really is simple, just check and recheck before cutting and drilling.

So .......

How did it go ??????

:nopics::nopics::nopics:

All went good cheers for the advice, The only problem i had was the air flow meter is which all the other disco 300's i no of haven't got one. But i managed to work my way around that. Didn't get any pics of the installation as i had to do it up my mothers as she was expecting a delivery. But i took some as soon as i got home.





Jol

looking good

I like your lightbar.