Finally Made A Purchase

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-Defender110-

-Defender110-

Well-Known Member
Posts
1,054
Location
limerick, Ireland
1991 200tdi 87000 miles, very very clean, small bit of work on the chassis needs doing, but nothing major. More pics to come :)
 

Attachments

  • IMAG0566.jpg
    IMAG0566.jpg
    828.3 KB · Views: 288
Some more photos of the insides, and the very worst of the rust and bits needing replacement, new door hinges and a few small patches and shes as good as new :)
 

Attachments

  • IMAG0575.jpg
    IMAG0575.jpg
    626.7 KB · Views: 217
  • IMAG0574.jpg
    IMAG0574.jpg
    150.6 KB · Views: 263
  • IMAG0573.jpg
    IMAG0573.jpg
    173.9 KB · Views: 255
  • IMAG0572.jpg
    IMAG0572.jpg
    578.4 KB · Views: 271
  • IMAG0570.jpg
    IMAG0570.jpg
    603.5 KB · Views: 296
  • IMAG0569.jpg
    IMAG0569.jpg
    641.2 KB · Views: 235
And some of the outside, some of ye might recognise the full length intercooler up front, that was a nice surprise :)
 

Attachments

  • IMAG0576.jpg
    IMAG0576.jpg
    276.3 KB · Views: 229
  • IMAG0577.jpg
    IMAG0577.jpg
    210 KB · Views: 240
  • IMAG0578.jpg
    IMAG0578.jpg
    205.5 KB · Views: 220
  • IMAG0579.jpg
    IMAG0579.jpg
    272.5 KB · Views: 283
Power sprayed the chassis and body today to get a look at the work that needs doing, not too bad, chassis didn't show up any more bad spots than i am already aware of, time to get the small few problems done now :)
 
hopefully not, all in all, the rest of them are not too bad but i'll be respraying the whole lot so might as well do the work on them while the are off. Pricing up hinge and s/s bolts as we speak too :)
 
-Defender110- said:
Thoughts on the chassis rust? best plan of action?? im considering biting the bullet and getting a new rear x/member?
Click to expand...

Yeah, looking at the pictures, you would probably want to consider a new rear 1/4 chassis instead of just the crossmember. It could be patched but looking at the state of it, you would probably end up requiring more repairs in the near future
 
yeah makes sense. im not planning on getting rid of it any time soon so might as well do it right. would i be right in thinking theres someone on here who fabs them?? as regards the spring seat area, a patch will probably do there will it?
 
-Defender110- said:
yeah makes sense. im not planning on getting rid of it any time soon so might as well do it right. would i be right in thinking theres someone on here who fabs them?? as regards the spring seat area, a patch will probably do there will it?
Click to expand...

Don't know of anybody on here off the top of my head but it wouldn't surprise me.

And yeah, looks like that bit could be patched fairly easily. What condition are the spring hangers themselves in?
 
-Defender110- said:
yeah makes sense. im not planning on getting rid of it any time soon so might as well do it right. would i be right in thinking theres someone on here who fabs them?? as regards the spring seat area, a patch will probably do there will it?
Click to expand...
That will be me:D
 
You must log in or register to reply here.

Similar threads

S
110 with Izizu 2.8 - Converting Back to 200tdi - What Mods?
Replies
11
Views
916
SimonBrown
S
J
Driving 1700 miles Altrincham to Estepona Spain in 90 2015
Replies
12
Views
677
dag019
dag019
T
Kent / Sussex - Help with a Defender 90
Replies
3
Views
415
lynall
L
R
Rate this 110 by soon to be owner (hopefully)
Replies
18
Views
2K
lightning
lightning
RustyDefender
lt77 vs r380 brackets / location
Replies
1
Views
409
Beardyjon
B
Back
Top