Disco 2 Faulty Alternator, what to do?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

MJI

Well-Known Member
Posts
16,074
Location
Worcester
Repair and keep
Tip
Se if anyone want one

Does not charge and the vac pump may have a leak.
 
Repair and keep
Tip
Se if anyone want one
Does not charge and the vac pump may have a leak.

Check it is the alternator first ....
Using a multimeter/voltmeter it's very simple.
You can get new regulator boards for some makes, often it is the board that is faulty,
New alternators aren't as well made as the old ones, even branded ones.
 
One on it is outright purchase. But not dure what to do with old one

You can get a new rectifier (diode pack), regulator and brushbox easily; worn-out copper slip rings on the shaft are harder to replace (I have seen one tutorial explaining the process) - the slip rings wear out if you get grit and oil between the carbon brushes and the slip rings - acts like cutting fluid! A multimeter can easily be used to check the integrity of the rotor and stator windings, the regulator and the rectifier (also, if battery is draining overnight it can be due to a faulty rectifier); electrical cleaning fluid can be used to clean oily, dirty windings. I had a lot of oil leaking down there at the vacuum pump and coating the alternator with oil - all gone now, nice and clean - a new copper crush washer on the vacuum pump feed stopped the oil spraying out.
 
Last edited:
Back
Top