Expect the Unexpected

My EAS height position sensors were working fine but I thought I’d give them a wriggle . Found they were looser than Iiked.
Thought I’d take a couple of piccies to keep you guys amused

Newinnwoodman said:

My EAS height position sensors were working fine but I thought

Click to expand...

^^^ this was your mistake

I am amused

They are not cheap

Is glue em for now

That’s the problem … I thought

I reckon those end bits will be 27 1/2p each

I had that on my disco so I 3D printed a couple of ends

backinblack said:

I had that on my disco so I 3D printed a couple of ends

View attachment 181674

Click to expand...

That’s brill

A classic case of, if it aint broke, dont fix it

backinblack said:

I had that on my disco so I 3D printed a couple of ends

View attachment 181674

Click to expand...

Been thinking again lol… any chance I could procure a small number of these from you pls?

I may as well do this whilst i am here is the downfall of many amateur mechanics. And sadly some professional ones a also. If it works and needs nothing more than a bit of lubrication, leave it alone.

Newinnwoodman said:

Been thinking again lol… any chance I could procure a small number of these from you pls?

Click to expand...

@Newinnwoodman I can print some off but I don't know if the Disco 2 is the same as the RR.

backinblack said:

@Newinnwoodman I can print some off but I don't know if the Disco 2 is the same as the RR.

Click to expand...

That would be fantastic. Thx. I’ll take one off Tomoz and send you a piccy of the dimensions.

No problem

No problem

Trying to post some pics with dimensions but it ain't working, will try again tomorrow.

Ah crap, I give up for tonight

That is brilliant. Did you design it yourself?

Yes, Here's the other pic I couldn't do last night. Mind you they don't look that good printed
I didn't keep the Disco very long after I fitted it so not sure how long it will last, and as it is hard plastic it won't soak up the bumps.
There is a 10mm collar on the (Disco 2) chassis mount that needs to be inserted in the hole which you may have open up a little with a 10mm drill bit.

I’ve done a bit of measuring and I do believe they will do the job mighty fine. I’ll pm my address and you can let me know what I owe you.
Thanks again
Rich