Exhaust manifold question

Arbuthnot · Jan 14, 2011

Chaps, I've got a 1983 S3 diesel with a rotten exhaust, which I need to replace for the MOT. I've been told the system I need depends on whether it's a 3 or 4 bolt manifold, mine is supposed to be 3 I think based on the year? Well I had a look and there look to be 4 bolts holding the manifold to the engine. I looked up the engine number and it is a 5 bearing diesel. Any advice?

oxides · Jan 14, 2011

Both have four bolts into the block. Earlier manifolds have a four bolt flange to the downpipe, later ones have a three. Look at your exhaust downpipe .

Arbuthnot · Jan 14, 2011

Cheers mate, I'll get me torch and have another look!

nrgserv · Jan 15, 2011

afaik if the downpipe goes straight down, its a 3 bolt with a loose flange and flare, 4 bolts exit into the wheel arch and are two solid flanges.

landy1963 · Jan 17, 2011

Hi there,

If a 2.5 NA manifold fits, it on the list for the scrap yard, by the end of the week, as is the entire engine

.
pm me if needed.

Bas

Exhaust manifold question

Arbuthnot

New Member

oxides

Well-Known Member

Arbuthnot

New Member

nrgserv

Well-Known Member

landy1963

Member

Similar threads