Ex-Mod SIII Shock Replacement.

Hi there,

So I've inherited a lovely Ex-MOD Series III LWB but before I can get it through MOT the shocks need replacing but I'm having some trouble identifying which ones I need.

It's on the military chassis with the hangers giving it the 2" + ride height but I can't tell which is the most suitable replacement (or if there are other alternatives I haven't found yet).

- 1 Ton shocks: Shock absorber-LWB 1ton front - RTC4231 & Shock absorber-LWB 1ton rear RTC4233
- Heavy Duty Shocks: Shock Absorber Hd 109 Front - RTC4484 & Shock Absorber Hd Rear RTC 4236

Unfortunately, I haven't got the Landy in front of me so I cant take a measurement but initially, I ordered the standard Shocks RTC4483 but they were 2" too short but I can't find anywhere that gives the dimensions of the shocks I mentioned above.

Any help would be greatly appreciated and if more information is needed I'll do my best to get it.

Cheers

do a search, I asked a similar question a while ago and got the numbers for the correct ones. this might help.https://www.landyzone.co.uk/land-rover/shock-absorbers-for-ex-mil-109-with-2-lift.346212/

Rodeo Joe said:

do a search, I asked a similar question a while ago and got the numbers for the correct ones. this might help.https://www.landyzone.co.uk/land-rover/shock-absorbers-for-ex-mil-109-with-2-lift.346212/[/QUOTE

Click to expand...

That's just what I was after.

I found this site after google searching that same question but your thread didn't come up. My fault for not looking hard enough!

Thanks, Rodeo Joe

Trippothy said:

That's just what I was after.

I found this site after google searching that same question but your thread didn't come up. My fault for not looking hard enough!

Thanks, Rodeo Joe

Click to expand...

No problem I like to keep my head down