wooly123
Active Member
- Posts
- 155
- Location
- rye east sussex
hi any one know,where to get my ecu looked at replaced or repaired ERR 6645 thank you.i wont go on e-- y as the three purchased in the past were duds,you live and learn i supposed
ERR 6645
- Thread starter wooly123
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 45,023
- Location
- Near Poitiers SW France
Year and model of vehicle and the ECU you are talking about might help.
- Posts
- 58,170
- Location
- Preston Lancs.
Engine ECU for GEMS Keith. Plenty to choose from. https://www.ebay.co.uk/p/Range-Rove...rol-Unit-ECU-ERR6645-with-Warranty/1525250362 Putting the security code from the ECU in the BECM may help.
wooly123
Active Member
- Posts
- 155
- Location
- rye east sussex
thanks datatek and wammers.
wooly123
Active Member
- Posts
- 155
- Location
- rye east sussex
1996 4.6 gems ecu err6645 is the one i need, brand new they are nearly 15000 .i have done security relearn ,have check light,still no start,thanks,will try ebay.
wooly123
Active Member
- Posts
- 155
- Location
- rye east sussex
hi would a free running ecu help do you think? thanks
- Posts
- 19,309
- Location
- Buckinghamshire, UK. ('95 DT)
My thoughts too. Could be a connection somewhere? The ECUs are pretty bullet-proof.
Not played with the GEMS much but you should be able to read the engine security code from the engine module and then compare it to the value stored in the BECM module.
wooly123
Active Member
- Posts
- 155
- Location
- rye east sussex
thanks KEV & GRRRR for the info ,will have a look
