Engine System Fault

I've had this fault message pop up. A month ago I got the car MOT'd and then left the car standing for a month whilst I was away working. My missus came and picked me up from work, a trip of about 17 miles. When I got in the car to drive it the fault message appeared. It seems sluggish to me, but then it could be my imagination as I've not driven it for a month. We have had rain of biblical proportions whilst I have been away.

Any ideas anyone? Thanks in advance

Get it on a code reader to see whats up,if left for a month it could be low battery voltage causing errors

Thanks Henry, code reader is on its way! Hope you are right about the low voltage!

SF

Stay Frosty said:

Thanks Henry, code reader is on its way! Hope you are right about the low voltage!

SF

Click to expand...

It does happen but normally after battery is charged up light will go out but may leave stored codes

The Fault code is P132B - Turbo boost control A Performance. I believe it could either be a sensor or the actuator arm has seized due to it standing for a month. It is a bit lazy at low speeds at the mo!

Right, I've got the car in bits and sprayed plenty of GT85 into the abyss behind the turbo.

There is a rod which looks like No 6 on the diagram below! Is this what I am looking for? I't doesn't move freely but I'm not trying that hard as I don't know what direction I should be moving it in, or how far it should be moving.

http://landrover.shukersparts.co.uk/actuat...d-pin.html