Engine not starting

Hi, have got series 3 lightweight running a v8 ,9.25:1 comp. Fitted new dizzy,leads,dizzy cap,rotor arm and plugs. When first fitted it ran fine , now it only fires on No 1- No 8 and No 2., there is no spark at any of the other leads .
Would be grateful for any info. Cheers Tony.

Hello and welcome

Cheers

Welcome

we like pics in this section

But if you have a look at the main forum and pick the best to suit LandyZone - Land Rover Forum
You will get loads of advise. but have heard some complain about bad/cheap dis caps and rotor arms good place to start.

Good luck

J

marjon said:

Welcome

we like pics in this section

But if you have a look at the main forum and pick the best to suit LandyZone - Land Rover Forum
You will get loads of advise. but have heard some complain about bad/cheap dis caps and rotor arms good place to start.

Good luck

J

Click to expand...

Cheers

Cheers , ordered new cap and rotor.

Welcome to the forum

Thanks for the warm welcome .

Look over what you did when you changed the parts first
Welcome

Welder59 said:

Cheers , ordered new cap and rotor.

Click to expand...

Make sure you get a Genuine Parts cap and rotor arm e.g. Land Rover V8 3.5, 3.9 Distributor Cap LUCAS STC8368; the pattern ones are no good and cause all sorts of misfiring issues.

Thanks for your reply