dipstick1963
Member
- Posts
- 11
- Location
- derby
hi can anybody tell me if the engine from a manual 2.5 dse go straight into the auto 2.5 dse i know ive got to swap flywheel ect but is the pump the same thanks
engine change
- Thread starter dipstick1963
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
Yes.
dipstick1963
Member
- Posts
- 11
- Location
- derby
cheers wammers was told your the best so i just plug everything back to mine
brianp38dse
Well-Known Member
- Posts
- 20,093
- Location
- heathrow
As long as the engines are the same ie both alloy inlet or both plastic inlet manifold.
dipstick1963
Member
- Posts
- 11
- Location
- derby
yes both the same so if i just plug in all the wiring to my ecu ect it should be all good ?
kds
Well-Known Member
- Posts
- 2,269
- Location
- old,ugly, tired in Lincoln.
You might have to change part of the loom to do with the sensors but thats pretty straight forward.
dipstick1963
Member
- Posts
- 11
- Location
- derby
if i just un plug from 1 engine to other is that ok i know these can be an arse from what ive read
Datatek
Well-Known Member
- Posts
- 45,015
- Location
- Near Poitiers SW France
Should be a straight swap, but you never know with Land rover.
- Posts
- 58,170
- Location
- Preston Lancs.
If you had read the first post in the Range rover section and provided the info asked for, answering you queries would have been a lot easier.
