Electric Window Faulty?

Right remove one of the green ones and see if that does owt to ny of the windows,

then swap the 2 green ones around. & see what effect that has.

Found the drivers side relay, will start swapping them now.

Swapped every green, still no luck.

And swapped with one green on the passenger side and still no luck.

So not a relay fault then. Check for 12V feed to the motor. if nothing there introduce one to confirm the motor int goosed. then check wiring for continuity between switch and motor.

Ok, just buttoned it all back up as have to pop out for a bit, will check motor later this afternoon or tomorrow.

Thanks for messages, will report back soon

Good news, I have 12 Volts at the door when pressing the switch, buzzed 12v on the motor and not getting anything out of it so hopefully it's just a motor change.

Opened the door up though and I have this cable which I am getting a constant 12V from, cable colors are orange @ pink. Any ideas anyone?

Even with no keys in the ignition this lead was giving a constant 12v.......

Had same issue on my 300, was the motor, changed it and all good now

Deacs said:

Had same issue on my 300, was the motor, changed it and all good now

Click to expand...

Cool, £10 for one from this LR place I am using now, so all good hopefully

FIXED

Changed motor out this Evening, all Woking well now!