Simon bishenden
New Member
- Posts
- 7
- Location
- Basingstoke
hi can anyone tell me if u need to reset the window to enter eka code please
Eka code
- Thread starter Simon bishenden
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 11,020
- Location
- North of the Wall
Simon bishenden
New Member
- Posts
- 7
- Location
- Basingstoke
I know how to do the code but can’t get it to work
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
What car are you trying to do it with?
Cheers
Cheers
brian47
Well-Known Member
- Posts
- 8,867
The OP's profile page lists a P38 as his current vehicle.
The process for using the EKA is given in the Owner's Manual, but if for whatever reason the EKA has been changed by a previous owner then you're going to have to find some way of defeating the immobiliser and then reading the installed code with a compatible code reader.
Why is the EKA needed? What's going wrong with the normal entry method? Has the EKA worked for you in the past?
- Posts
- 15,218
- Location
- Benfleet, Essex
EKA and "window not set" is all about after-effects of a flat battery I think.
If your EKA code isn't going in then your doorlock contacts may be shagged.
Do you get any confirmation of EKA code entry on the side flashers or on the dash?
If your EKA code isn't going in then your doorlock contacts may be shagged.
Do you get any confirmation of EKA code entry on the side flashers or on the dash?
Simon bishenden
New Member
- Posts
- 7
- Location
- Basingstoke
No I get no indication at all I put the code in and nothing happens
Simon bishenden
New Member
- Posts
- 7
- Location
- Basingstoke
I flattened the battery by leaving the radio on for a hole day and iv never needed the eka code before so i went to my land rover dealer and they gave me my eka code for the car I brought a new battery as my old one was reading faulty and iv tried the code now and I get get it to work
Similar threads
