EFi=Bin Carbs in!

Yogi Bear · Nov 22, 2010

If I remove the EFi from my 3.5 V8 RRC is it just a case of a rewire for a simple ignition setup, carb setup and off I go?

If anyone has done this before I would appretiate any advice

Jon

Black_N_Decker · Nov 22, 2010

why so it drops power and uses more fuel?

Yogi Bear · Nov 22, 2010

Atm the EFi loom is fried, I have a chap coming today to see if it can be sorted but carbs is another option should it be shot.

I have just removed carbs from a friends V8 90 and fitted EFi but he took care of the electrics.

Ragtag · Nov 23, 2010

Yogi Bear said:
is it just a case of a rewire for a simple ignition setup, carb setup and off I go?

You would need to change the fuel pump to a low pressure version. The efi pump works at about ten times the pressure needed for carbs.

Cheers

Chris

Mr Noisy · Nov 24, 2010

surely an efi loom is available cheap

the efi and igntion are separate (apart from 1 wire for engine speed sensing) so the igntion will be happy without the efi

i run efi offroad and dont get a whistle of trouble with it, i think it's a superb system, bloody uneconomical but ruthlessly simple and easier to maintain than carbs probably! also, it works upside down

EFi=Bin Carbs in!

Yogi Bear

New Member

Black_N_Decker

Banned

Yogi Bear

New Member

Ragtag

New Member

Mr Noisy

Coming in your ears.

Similar threads