- Posts
- 4,477
- Location
- Rotherham
Only if it has hundreds and thousands on it
Ecu swap dse 98 with dhse 00
- Thread starter P38dse1998
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 18,985
- Location
- Buckinghamshire, UK. ('95 DT)
That was another part of the dream.
- Posts
- 4,477
- Location
- Rotherham
I'd write these dreams up you could have a best seller and think of the movie rights. Plus then you could dream about who to have as a leading lady
- Posts
- 58,170
- Location
- Preston Lancs.
Bit of general info for those who dream about fitting a chip and improving their MPG. The only way of achieving more power and torque is to inject more fuel. If you use the power and torque you use more fuel simples. Around town stop start depending on terrain you WILL use more fuel on a chipped engine. The only fuel saving advantages, maybe a couple of MPG, will come to light in torque lock above 50 MPH on a long steady speed run. Because of the more linear map. Chipping to get 170 BHP and the same torque as a 4.0 litre petrol and using that power and torque causes you to use more fuel. Don't believe the advertising it's bollocks.
P38dse1998
Member
- Posts
- 77
- Location
- Dalgety bay, Scotland, uk
My mistake the discsand pads were £156 all in.
Mpg wise, if I get a little better then no problems. I'm more interested in the truck moving and it does that a hell of a lot better now with the chip.
Mpg wise, if I get a little better then no problems. I'm more interested in the truck moving and it does that a hell of a lot better now with the chip.
- Posts
- 58,170
- Location
- Preston Lancs.
Quite possibly but don't tow anything heavy with it. The only thing slotted and drilled discs will do better than the standard ones is look better on McDonald's car park.
Datatek
Well-Known Member
- Posts
- 44,074
- Location
- Near Poitiers SW France
If it's an auto, prepare to replace the gearbox.
