Ebay bargain!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Are they easy enough to fit mate?

Just that i've got a dp steering guard fitted and the hangers for that are bolted outside of the chassis spars at the front and the plate comes up quite high.

Daz
 
DISCOVERY1-DAZ said:
Are they easy enough to fit mate?

Just that i've got a dp steering guard fitted and the hangers for that are bolted outside of the chassis spars at the front and the plate comes up quite high.

Daz
Click to expand...
you may have a problem pal, it has 2 plates that go on the inside of chassis, mounting on same bolts as bumper - which can be interesting if putting it on on your own :D
 
Daz I see your in Paisley, For carriage speak to Mundells in Hillington they are a freight forwarder you might save a quite a few quid by getting it delivered to them, then pop over and pick it up for a few bob handling charge, they will put you right on how to go about it.
Dev
 
Some guy called steve bought my bullbar off me for £60 then tried to sell it on ebay for £80 followed again at £120 twice after it didn't sell

Still hasn't gone :rolleyes: was a big HD chrome one too ........stupid ****er
 
Thanks for all the info guys!
Will have some help to fit it as it probably will be quite awkward.
Might have to cut some slots in the steering guard to allow em both to be fitted at the same time! But i'll have to tidy it up and repaint it before then.

Cheers
Daz
 
Got the bullbar today! :)
Not in bad condition, actually looks quite good.
BUT its been powder coated and there is a lot of "bubbling" so there must be rust underneath the powder coating.

Have thought i could remove the powder coating and sort the rust out and then hammerite it!

Anyone have any ideas on the best/easiest way to remove the coating??

Cheers
Daz
 
Nice buy.

I got my stainless steel bull bar on ebay for £120



A bargain but i had to drive from Maidstone to Skegness to collect it :eek:

Gave the wife a weekend away by staying over in Norfolk but my bargain ended up costing nearer £300 by doing that :eek: :eek: :eek:

Was worth it to me :D
 
You must log in or register to reply here.

Similar threads

J
EPB, repair or replace? £800, £150 or £15.00 for plastic gears.
Replies
2
Views
249
jimseng
J
R
L322 thermostat housing help
Replies
6
Views
1K
roythebus
R
J
Lucky barn find?!
2 3
Replies
59
Views
9K
Andy Warren
Andy Warren
tilly2
Radius arm nuts. Whats the torque.
Replies
4
Views
433
tilly2
tilly2
L
Hi
Replies
2
Views
567
Luke2025
L
Back
Top